The best answers address the question directly, and back up facts with wikilinks and links to sources. Do not edit others' comments and do not give any medical or legal advice.
Why rebassed songs like this one involves replacing bass from original with a "new" one (essentially applying a highpass filter on original signal), instead of encoding the rebassed part into the LFE channel and keeping the original two channels intact (essentially making it a 2.1 stereo)? By 2.1 stereo, I mean 3 separate channels (first two are left and right channels respectively with the last one is dedicated LFE channel). 2001:448A:3070:D641:A0A3:AF2:596E:8A96 (talk) 00:28, 5 December 2024 (UTC)[reply]
The OP's example sound-only video is a remix called "rebassed" of a sound-only video popular a decade ago. The normal lossy audio coding on YouTube videos stands in the way of attempts to boost the dynamic ranges of loudness or frequency. The "rebassist" may hope to have increased the song's dramatic effect but I regret that on my audio system his manipulated low frequency tones intrude as unpleasant distortions. I don't see that this "rebassing" example was more than a poorly controlled re-coding of an analog mashup that fails the claim to make bass notes "much louder without any audible distortion". The OP can be correct in proposing that bass tones could be mixed with better control in the dedicated LFE (Low-frequency effects) channel of a 2.1 stereo system. However encoding and reproducing the dramatic result will likely go beyond the capabilities of both YouTube and my ordinary loudspeakers.
After a music recording is produced in a modern studio equipped to balance audio dynamics across the frequency range, a serious listener ("audiophile") can adjust the bass content using the Baxandall bass control (Baxandall,1952, -6 dB/octave) built into many amplifiers or invest in a multi-band graphic equaliser. Neither action involves irrecoverable distortion or paying a 3rd party to re-record the source sound. Philvoids (talk) 16:31, 10 December 2024 (UTC)[reply]
@Philvoids: though YouTube does support 5.1 surround sound so theoretically, you can encode a 2.1 stereo as 5.1 surround (either encoding silence to center and rear channels, or a center part of center-extraction to center channel and a non-center counterpart of the aforementioned extraction to rear channels) if YouTube doesn't support 2.1 stereo (L/R w/ dedicated LFE). 2001:448A:3070:DCCD:D862:849B:9C69:6E43 (talk) 05:18, 12 December 2024 (UTC)[reply]
I have a personal project for which I'd like to make images of jerseys and put player numbers on them. Basically what WP has on the page for any sports team. I only need the jersey and not pants, socks, etc. The project is for creating digital flashcards. For instance, if I were making a card for Michael Jordan, I'd grab my template of a basketball jersey, change the colors to the appropriate colors for the team, overlap a "23" on the jersey, and save that as an image to use on my flashcard. Optimally, I'd like to have different jersey templates for US sports (NFL, NBA, MLB, NHL, MLS, PWHL, NWSL). How can I do this most easily? As you probably suspected, I have no image manipulation experience. FWIW, I'm on a Mac. Thanks! †dismas†|(talk)20:53, 5 December 2024 (UTC)[reply]
In theory you could use it (in a sandbox) to produce arbitrary jersey images and take screenshots of the results. But it's gone wrong here, evidently it wants some data from some kind of context. Well, it works fine in a sandbox, just not here. Card Zero (talk)06:36, 6 December 2024 (UTC)[reply]
It did not work because of the indentation colons inside the template body. This should work:
Thanks. I suppose there's no way to scale these up nicely, either. The number could potentially be added in an image editor (in Impact (typeface), most likely), if imprecise centering is acceptable. There's Category:Kit_and_uniform_templates for other sports.
Using subst: before the template name makes the SVG code visible upon editing, but I can't think of a lazy way to then scale the whole image up to something approaching fullscreen. (This is best done at the SVG stage rather than in a raster editor, to avoid jaggies or blurred edges. An alternative would be to save the svg and open it in Inkscape for scaling and further modification.)
Oh, what am I saying, it's not one SVG, it's CSS with several SVGs arranged within it. Maybe a screenshot followed by crappy raster upscaling is the best way, depending on tolerance for low quality in whatever this project is. Or ... there are upscaling algorithms suitable for simple images that maintain sharp edges, but I'm not sure what software allows their use. Imagemagick?
This whole thing might be a valid use for AI, if you can get it to behave itself.
Thank you! I'll look into those options. The images don't have to be big. They're going on flashcards, so maybe a few hundred pixels per side. †dismas†|(talk)13:24, 6 December 2024 (UTC)[reply]
I don't really know what a digital flashcard is. If this is for Anki (software), it seems that its flashcards are essentially webpages and would probably accept svg images, making pixel size irrelevant. (Or maybe not, its manual is vague, I can't find a list of supported image formats.) Card Zero (talk)14:54, 6 December 2024 (UTC)[reply]
I'm not clear. I'm not recreating the uniforms exactly. Using my Michael Jordan example again, I'm just making a red basketball jersey with the number 23. That could be anyone's. Why would I run into any legal issues if it weren't for a personal project? †dismas†|(talk)22:26, 9 December 2024 (UTC)[reply]
Are there any Australian multinational companies? None comes to mind. There are many American multinational companies, but are there any Australian ones? --40bus (talk) 10:12, 7 December 2024 (UTC)[reply]
I'd like for my mother's 600-Bitcoin joke to be submitted to Guinness World Records for the most expensive joke ever told to anyone in the world, because 600 Bitcoin is now worth >$60,000,000.
She told me in 2014 that she had invested 600 Bitcoin in 2011. Years later, getting desperate about figuring out a way out of my student loans, I asked her to cash out a little of her bitcoin investments in order to pay off my loans, and my siblings', because it appreciated so much. She didn't know what I was talking about. So I reminded her about her 600 bitcoin investment claim that she told me in 2014.
Then she said "I was only joking."
Now I wonder whether that was the most expensive joke anyone has ever made in recent history. If there were more expensive jokes than that, may I know about them? But if not, how do I submit that joke to GWR for being the most expensive joke ever? What criteria do jokes have to meet to be recorded on Guinness World Records? Thanks. --2600:100A:B037:56CA:C994:6FC:E8CE:B0CE (talk) 04:08, 8 December 2024 (UTC)[reply]
I don't know what you're talking about. How is that an expensive joke? What's expensive about it, anyway? An expensive joke would be a joke that led to some expenditure. --Viennese Waltz06:39, 8 December 2024 (UTC)[reply]
As it happens, I personally own the asteroids in the solar system, no joke. They contain quadrillions worth of gold. Reveal your identity, and I'll bestow all this wealth to you in my will. --Lambiam07:43, 8 December 2024 (UTC)[reply]
I think you'll find it's dwarfed by Russia's "joke" fine of Google to the tune of $20,600,000,000,000,000,000,000,000,000,000,000. April foolski! Clarityfiend (talk) 14:29, 8 December 2024 (UTC)[reply]
A reasonably thorough Google search failed to find anything. They have a whole park full of old Soviet statuary at Maarjamäe Palace.
Our Soviet-era statues article says: Statues of prominent socialist figures - particularly of Lenin - were mass-produced and installed in villages, towns and cities across the Soviet Union.
There is nothing to suggest they would be related; they are paid models. Just like "families" shown in movies are not actually related; they are actors. Shantavira|feed me15:16, 10 December 2024 (UTC)[reply]
For use in such posed photographs there are many agencies that offer well-prepared socially presentable WASP models of whatever ages you specify at short notice and at competitive prices. To add the requirement that the models are related in real life is unnecessary, would incur greater hiring expense and is therefore less than probably done here. The ostensible mother could in that case be complimented on her fresh appearance after gestating and birthing the two siblings. Shantaviraj mentions movie stardom where being born to an established star has for many, with some salient exceptions, proven to be more a burden than a boon on their career. Philvoids (talk) 15:59, 10 December 2024 (UTC)[reply]
What is it like for mental health clients to live in group homes? What is paid out-of-pocket? What is paid by insurance?
As a diagnosee of schizotypal personality disorder and other disorders, and being thought to still be on the Autistic Spectrum by some therapists despite a rediagnosis to the above disorder, is there a group home near or in Hutchinson, KS for anyone with my types of disorders?
I hope to no longer have to pay $450/month in rent and over $100/month in energy bills as well as $70/month in Cox internet at 1 GBPs if I move into a group home and have health insurance pay for it all.
I would only intend to live there until all of my debts are paid off and once I have substantial investments saved up, including dividend stocks so I can live off of a passive income that pays for basic living expenses in a normal residence again.
The only people who could possibly answer this are KanCare Sunflower health insurance. Look at the terms of your agreement or ask them directly on their help line. Shantavira|feed me09:56, 11 December 2024 (UTC)[reply]
I received an unsolicited email soliciting a contribution to an upcoming issue of a biomedical journal. My contribution, they assured me, coming from an eminent researcher like me, would greatly enhance the quality of said issue. This may well be true, but, since my knowledge of biomedical issues has largely been formed by doing research to answer questions at the Reference desk, this does not bode well for the quality of this issue, even with my eminent contribution. I don't want my name to be associated with low-quality journals, so I'll refrain from contributing.
The email states at the bottom, in fine greyish print,
BioMed Grid LLC, California, USA. If you do not wish to receive this email, revert us.
I indeed do not wish to receive this email and would like to unreceive it. But I can't figure out how to revert this company. Can anyone help me? (There are some more companies I'd also like to revert.) --Lambiam09:19, 12 December 2024 (UTC)[reply]
But is it? I'd never seen this before. Our article on the journal states that the publisher, Biomedgrid LLC, was first registered in California in 2018 by Sasidhar Vontethina and Sushma Manchikanti, both Indian (more specifically Telugu) names. --Lambiam08:58, 15 December 2024 (UTC)[reply]
What are similarities and differences between LUFS meter (especially momentary) and Audiosurf's audio analysis algorithm (when comes to how tracks are colored in particular way depending on the song intensity)? Considering the color (when "fancy coloring" mode is enabled) of momentary LUFS bar on my own multichannel peakmeter when fed with the same song as the video, lines up with the color of the blocks and the tracks on this video and/or this sometimes and at other times, it doesn't line up assuming they somehow sync with the video. 2001:448A:3070:DCCD:D862:849B:9C69:6E43 (talk) 03:43, 13 December 2024 (UTC)[reply]
The article about the Audiosurf game tells that the game engine analyzes an imported song to create and save its dynamics in an ASH file. Reverse engineering these files to extract the generating algorithms is research that is beyond anyone here. This is proprietary information that the game creator Dylan Fitterer may choose to withold. Already as you look for correlation between your objective LUFS detector and the game screen, bear in mind that where the object of Audiosurf is more to entertain than analytical logging, some degree of randomity may be deliberately included. Philvoids (talk) 16:32, 14 December 2024 (UTC)[reply]
The word "meta" means “beyond” and “about”. The word “physics” means “nature”. Therefore, metaphysics can be regarded as the branch of philosophy that studies the fundamental nature of reality and existence. Stanleykswong (talk) 06:45, 19 December 2024 (UTC)[reply]
Των μετά τα φυσικάThe Ancient Greek preposition μετά also means "next, after". It is generally thought that the title of Aristotle's book Των μετά τα φυσικά (Tōn metá ta phusiká), "Of the things after Physica", the etymon of our term metaphysics, was given to it (not by Aristotle but by the editor) simply because it was the next book in series, following Aristotle's book Physica, "Natural phenomena". --Lambiam11:22, 19 December 2024 (UTC)[reply]
Reading these posts (this and this) on a thread about foo_enhanced_spectrum_analyzer in HydrogenAudio forum about my doings that "scared" off a developer of foo_enhanced_spectrum_analyzer and foo_loudness_peakmeter components for foobar2000 player and yet, the developer of a spectrum analyzer plugin for MusicBee did implement my feature requests into this plugin despite I've not have written fanon wiki pages about future version of CoolEdit Nostalgia (like I did this and this before). So, why would they? 2001:448A:3070:EA0F:F1A2:31A3:43A5:587B (talk) 18:22, 16 December 2024 (UTC)[reply]
I don't understand finance, so I thought I'd ask. If I buy a futures contract for say a ton of corn at a specific price, and I hold it until the delivery date, will someone literally deliver a ton of corn to me? Thanks. Therapyisgood (talk) 00:04, 17 December 2024 (UTC)[reply]
The contract is likely to read "FOB Kansas City," or something like that. You'll probably have to move it from whatever transportation it is on (train, ship) yourself. Or, arrange (pay for) delivery. DOR (ex-HK) (talk) 01:38, 17 December 2024 (UTC)[reply]
At the delivery date, the current buyer will have become the proud owner of a ton of corn somewhere. The identity of the buyer of the contract almost always changes, so the seller drawing up the contract does not know the identity of the eventual buyer at the delivery date. Therefore, wherever the "somewhere" may be, you as the buyer can be reasonably sure it will not be delivered to your doorstep. --Lambiam09:54, 17 December 2024 (UTC)[reply]
Oil futures have even been known to have a negative price, when the producers' local storage was full and demand was low. At that point the buyer of the contract is being paid to take it away. [1] --Amble (talk) 20:30, 17 December 2024 (UTC)[reply]
True, but this depends on both parties agreeing to a new or modified contract. If the buyer does the unexpected and just sits it out, as suggested in the original question, and also does not agree to a new contract, the seller is obligated to produce the asset to the buyer, even if this means they need to go and buy it on the market. --Lambiam10:58, 19 December 2024 (UTC)[reply]
When asked "WHO IS YOUR X?" (X still being unknown to me but is known to the respondents), here are the answers I get:
A answers: "A"
B answers: "C"
C answers: "C"
D answers: "F"
E answers: "F"
F answers: "F"
To sum up, the special phenomenon here is that, everybody has their own X (usually), and if any respondent points at another respondent as the first respondent's X, then the other respondent must point at themself as their X.
I wonder who the unknown X may be, when I only know that X is a natural example from everyday life. I thought about a couple of examples, but none of them are satisfactory, as follows:
X is the leader of one's political party, or X is one's mayor, and the like, but all of these examples attribute some kind of leadership or superiority to X, whereas I'm not interested in this kind of solution - involving any superiority of X.
Here is a second solution I thought about: X is the first (or last) person born in the year/month the respondent was born, and the like. But this solution involves some kind of order (in which there is a "first person" and a "last person"), whereas I'm not interested in this kind of solution - involving any order. 79.177.151.182 (talk) 12:11, 19 December 2024 (UTC)[reply]
I mean that everybody has their own X (usually), whether X is one's mayor, or X is the leader of one's political party, and so forth. Additionally, keep in mind that if any respondent points at another respondent as the first respondent's X, then the other respondent must point at themself as their X. 79.177.151.182 (talk) 15:21, 19 December 2024 (UTC)[reply]
There are too many possible answers that still don't involve order or superiority.
- Translator
- Publisher
- Spokesperson
- Copyeditor
- Cleaner
- Keyholder (person who closes a shop and responsible for turning up in cases of property related emergencies - sometimes it's a manager but sometimes it's merely someone who is willing to stay late or be early)
- Scribe
- Accountant
- Driver
Basically anything where there's a "role" in a group but usually only one (barring circumstances).
Resolved
_(7622411298).jpg){kind=link}